In the era of advance supercomputer technology, nowadays printers have become an urgent necessity of every user. They are becoming more advanced day by day, therefore many printer companies are manufacturing most advanced & user friendly printers with advance, user friendly and unique features. Various kinds of printers available in the market, wireless printers have become the first choice of almost common computer users. Recently, wireless printers permit to multiple users to print from anywhere from housing area or office without physical cables. The installation process of HP wireless printer is a little different from other printers. Therefore, easy &important steps for installing a HP wireless printer are given below:-
Initially, eliminate all kinds of caring materials and orange color tape from the external of the machine. If you look for quick tech support, you should call HP Printer Tech Support Phone Number 1-800-956-0247 immediately.
Next step, you have to open the Paper Outlet Tray of the printing machine and then lift the Scanning Unit Cover. Take out the print cartridge and eliminate the protecting materials and tape from the Ink Cartridge Holder. You have to close the cover of Scanning Unit.
You need to connect the power cord to the power interface of the device and connect the other side to the power outlet.
Switch on the printer just by clicking the ON button. You can choose the language using the Operational Panel.
You need to click on same ON button to switch off the printer. You have to Open the cover of the Scanning Unit and place Ink Cartridge Holder into the Holder. You have to close the Scanning Unit instantly.
Just click ON again to switch on the printing machine. After this step, you need to wait for a while for printer to adjust the cartridge. If you do not know about this step, you must call at HP Printer Support Phone Number for instant tech support.
For Set up Wireless LAN, you have to click initially on the set up button and use operational panel. Once done this process, you have to click on OK button.
From the operational panel, select simple set up and press OK button. After this step, you have to choose access point and then click on button “OK”.
Just by using same operational panel, you have to insert WEP-KEY and then press OK button.
You must put printer installation disk into a laptop or computer that will display Auto Play screen, therefore you have to click on RUN Msetup4.exe on the screen. In the case, if Auto Play screen will not open easily, you have to go CD-ROM folder and click open button on Msetup4.exe application. If you face any technical error, you must call at toll free HP Printer Help Support Phone Number immediately.